Reply To: wire wheels

Home Page › Forums › Buy/Sell › wire wheels › Reply To: wire wheels

#401601
H. Paul Johnson Jr.

The 1935 8’s and 12’s both had the rolled bead wheels. The width between the beads on the wheels for the 8’s is 4.00 inches and for the 12’s 4.19 inches. Greg’s caution on assuring that the drain hole is open on the edge of the bead is a very important safety matter. It is important that this little hole be kept open when refinishing these wheels. If water trapped in the bead causes rusting, this will more likely appear first on the inner side of the bead.