Reply To: generator disassembly and regulator

Home Page › Forums › Engine › generator disassembly and regulator › Reply To: generator disassembly and regulator

#401847
Bob Jacobsen

Hi Jim,

One note on solid state (diode) cutout replacements – I had a simple 25 amp diode cutout replacement fail in my ’34, and since the generator then had no load on its output, the voltage went up around 18 volts and blew the top solenoid in the Startix unit. Of course, the same thing could happen if a conventional cutout coil opened up, but I have never seen that happen. To avoid any future problems, I went back to a conventional cutout, and just to be safe, installed a fuse (I believe 2 amp) in the generator to Startix lead. My ’34 is a 3-brush system and has no problems with overcharging.

Bob