Reply To: Rear Axle Torque Arm Flex Joint Repair

Home Page › Forums › Chassis › Rear Axle Torque Arm Flex Joint Repair › Reply To: Rear Axle Torque Arm Flex Joint Repair

February 24, 2019 at 9:23 pm #409078
F Arnold Romberg

I replaced this mointing with a (scrap) piece of belting that I gdot from a local ruck repair shop. Greg is right that it needs to be strong . I used a piece which was about 1/4″ or 5/16″” in thickness. This was on my 1929 Pierce and it works fine. Be sure to use the reinforcing washers from the original.”