1929 dual cowl front windshield frame wanted.

Home Page › Forums › General › 1929 dual cowl front windshield frame wanted.

  • This topic has 5 replies, 6 voices, and was last updated 9 years ago by
    Author nameAuthor names are only available to PAS members.
    .
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 8, 2015 at 3:18 pm #391327
    Author nameAuthor names are only available to PAS members.

    Hi all,

    Does anyone have a front windshield frame for a 1929 Dual Cowl Phaeton????

    Thanks, Rick

    April 8, 2015 at 4:20 pm #399439
    Author nameAuthor names are only available to PAS members.

    Rick,

    If all else fails, you can try these people

    N/C Industries Antique Auto Parts

    301 South Thomas Ave. PO Box 254

    Sayre, PA 18840

    Phone: 570-888-6216

    They are listed in the parts registry. They are not quick, at the rate you are going the rest of the car will be done before you get the frame, but they offer at least an option.

    Bill

    April 8, 2015 at 5:42 pm #399441
    Author nameAuthor names are only available to PAS members.

    Yes, I agree, you’re going to need something fabricated. I can’t imagine that this is a part that someone has sitting gathering dust. The picture isn’t coming up on my screen, so I don’t know what the issue might be.

    If you really get in a bind, I have an excellent local metal man, specializing in antique and Classic cars (he’s working on a ’33 Chrysler and a ’60’s Ferrari now), and he could replicate a frame for you. $50 an hour, but honest hours and great work.

    April 8, 2015 at 10:02 pm #399445
    Author nameAuthor names are only available to PAS members.

    Bob Dluhy made on for his 31 touring last year, give him a call.

    April 8, 2015 at 11:51 pm #399436
    Author nameAuthor names are only available to PAS members.

    yes I do its an old original very good for a pattern give me a call 760-533-4226

    April 9, 2015 at 1:51 pm #412682
    Author nameAuthor names are only available to PAS members.

    Rick,

    Give N/C Industries, in Sayre, Pa. a call. They just might have the correct pattern in stock. If not, send them your old one-requesting the parts needed for “YOUR SHOP,” to the finishing fabrication.

    They have done this in the past. They’re good people!

    Bob

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.