valve adjustment

Home Page › Forums › Engine › valve adjustment

  • This topic has 1 reply, 2 voices, and was last updated 17 years ago by
    Author nameAuthor names are only available to PAS members.
    .
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 6, 2007 at 6:09 pm #389939
    Author nameAuthor names are only available to PAS members.

    I am putting new valves in and grinding the seats in my 29 Str.-8. The spec sheet that I have says the valve lash is to be set at 6 thousands (hot). Can someone tell me what the lash should be set (cold)?
    Thanks,

    December 7, 2007 at 8:18 pm #393331
    Author nameAuthor names are only available to PAS members.

    Cal,

    While your at it, remove the lifter caps (the adjustable part that contacts the valve stem) and have them ground flat. Quite often they are cupped from the constant pounding and you can’t get a true lash adjustment.

    My cold settings are .006 for intakes and .008 for exhausts. You can err on the wide side but dont’ let them go under the setting.

    Keep us posted on your progress.

    Bill

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.