MODEL 80 DASH INFORMATION

Home Page › Forums › Body › MODEL 80 DASH INFORMATION

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 19, 2009 at 8:16 pm #390102
    Author nameAuthor names are only available to PAS members.

    1927 MODEL 80 PA. 4 DOOR COUCH . DASH AROUND THE LIGHT AND KEY SWICH ON BACKSIDE FLAT METEL PLATE IS TWO STUDS MOUNT THE SWICH.. BUT MY SWICH HAS 4 HOLES FOR 4 STUDS . WAS THER DIFER BOLT LAY OUT . MY CLOCK IS WALIHAM AND SPEED O IS TO. THE LIGHT AND KEY SWITH IS MARKED DELCO.

    February 19, 2009 at 8:18 pm #393611
    Author nameAuthor names are only available to PAS members.

    DASH BACH SIDE

    February 19, 2009 at 9:34 pm #412056
    Author nameAuthor names are only available to PAS members.

    Hi Randy,

    Some of the instruments on my Series 80 have a “Bar” that runs flat across the back of the instrument through two bar holders and attaches over the two bolts.

    In the next few days, I will check my ignition switch / lighting cluster.

    The Delco ignition is correct, as is the Waltham “8-day” clock.

    The toggles for the Delco ignition / lights are available in either nickel or chrome through a 20’s Buick supplier, like Bob’s Automobilia.

    Peter Williams

    March 3, 2009 at 7:40 pm #393621
    Author nameAuthor names are only available to PAS members.

    Randy, photo is of a spare 80 dash I have but matches the dash in my 27 series 80.

    Tom Abbott

    March 3, 2009 at 7:41 pm #393622
    Author nameAuthor names are only available to PAS members.

    See other picture..Tom Abbott

    March 8, 2009 at 4:51 pm #393624
    Author nameAuthor names are only available to PAS members.

    Randy, I have sent you two e-mails today with several photos each.

    These represent what my spare dash looked like with everything in

    place the I disassemble hotoing each step aling the way. Photos of

    individual parts as well. Tom Abbott

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.