Numbers stamped on rear axel

Home Page › Forums › General › Numbers stamped on rear axel

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 25, 2012 at 9:40 pm #390690
    Author nameAuthor names are only available to PAS members.

    I’m finishing the restoration of my 1909 Model 24T and notice some numbers stamped into the rear axle. My car serial # is 20059 but on the rear axle tubes there is a number 718262 stamped on each side – one with RH and the other with LH on each tube. Does anyone know what these numbers relate to ??

    I’m also looking for the carb. for this car…..any leads are appreciated.

    Rich Anderson 206-240-9434

    August 26, 2012 at 10:13 pm #395477
    Author nameAuthor names are only available to PAS members.

    My best guess is it is the casting part number. All Pierce factory part numbers start with the number 7 as far as I know. How about posting a few photos of your car here, as we all like to see new projects as the members are working on them. Ed

    August 28, 2012 at 2:39 am #395480
    Author nameAuthor names are only available to PAS members.

    Usual practice was to put the auto’s number on major parts(carb

    included).They didn’t produce casting part numbers in 1909.Your

    serial# looks authentic.The letters E,EE,S,SS appeared after the

    the 5 numbers. Or like yours,no letters followed it.20,000 was the

    lowest number and 20,099 was the highest in that series.103 built

    in total.Does your rear end match the other 24T survivors? Does your

    car’s serial number appear on numerous parts? Good Luck!

    Tony

    August 31, 2012 at 10:06 pm #395498
    Author nameAuthor names are only available to PAS members.

    I’ve tried 2x to upload pictures…but no luck ???

    August 31, 2012 at 10:13 pm #395499
    Author nameAuthor names are only available to PAS members.

    Richard,

    Make SURE that the picture file you are trying to upload does not have blank spaces in the file name…it won’t work.

    Paul

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.