Stewart-Warner Braking System 1933-1935

Home Page › Forums › Chassis › Stewart-Warner Braking System 1933-1935

  • This topic has 3 replies, 3 voices, and was last updated 11 years ago by
    Author nameAuthor names are only available to PAS members.
    .
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 19, 2013 at 12:22 pm #390911
    Author nameAuthor names are only available to PAS members.

    To the member asking for information on the Stewart-Warner Braking System:

    Order a copy of PAS Service Bulletin 74-1 which is a reprint of a very good S-W manual on that system. (Note: The discription of PASB 74-1 is mislabelled on the order form.)

    October 28, 2013 at 1:42 am #396372
    Author nameAuthor names are only available to PAS members.

    Thank You will do so

    October 28, 2013 at 8:13 am #396373
    Author nameAuthor names are only available to PAS members.

    Try here.

    http://restorecarsclassifieds.com/wiki/show_pdf.pdf?n=4677

    November 4, 2013 at 1:22 am #396421
    Author nameAuthor names are only available to PAS members.

    Thank you, Mr. Lyons and Johnson

    The website information indicates that the operating shaft is sealed with a replaceable cork seal. As my unit leaks profusely from this area I would assume the seal is defective. Wont know till the unit is dissembled. Would wish to correspond with members who have experienced refurbishing this unit.

    http://[email protected]

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.