Lock rings

Home Page › Forums › Chassis › Lock rings

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 24, 2014 at 9:17 am #390992
    Author nameAuthor names are only available to PAS members.

    Could anybody tell me what kind of (original) tool your are using to remove the lock ring? I have tried with a heavy screwdriver but it is slipping out of the square hole. Photo?

    February 24, 2014 at 5:39 pm #396922
    Author nameAuthor names are only available to PAS members.

    Olivind,

    Here is a thread from the AACA

    http://forums.aaca.org/f120/lock-ring-rims-195630.html

    Good luck,

    Bill

    March 24, 2014 at 1:49 am #397025
    Author nameAuthor names are only available to PAS members.

    I had very good results protecting the paint on rims using strips cut out of 1Qt oil bottles. Pry against the strip when removing the ring and put strips between the rim and ring when replacing. Remove the strips after the ring is completly installed. NO chipped paint.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.