Steering wheel & box.

Home Page › Forums › General › Steering wheel & box.

  • This topic has 3 replies, 2 voices, and was last updated 10 years ago by
    Author nameAuthor names are only available to PAS members.
    .
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 8, 2014 at 1:23 am #391172
    Author nameAuthor names are only available to PAS members.

    Hi AGAIN!! Since I have been clogging up the messageboard today I will continue! Attached is a photo of the steering wheel in my 1929 Club Brougham. Obviously NOT the original. The “shiny”” manette is one I made from alloy to replace a irretrievable Bakerlite one.

    The next photo is of the steering box. Obviously a Gemmer But from what? I have rebushed & adjusted everything & it functions as it should.”

    November 8, 2014 at 1:29 am #398044
    Author nameAuthor names are only available to PAS members.

    Photo#2. Adding to this The mounting to the chassis web has 4 bolts BUT of different spacings to the original slotted holes. The “new”” holes have been “”blown”” into the chassis by blow torch. Blacksmith like BUT effective!!

    Jak”

    November 8, 2014 at 7:01 am #398052
    Author nameAuthor names are only available to PAS members.

    Jak…..the car looks great. Drive it like you stole it!

    November 8, 2014 at 8:26 pm #398060
    Author nameAuthor names are only available to PAS members.

    MAGIC advice

    I’m with you Ed!!!! And driving it I will

    as soon as I stick the radiator back together. Cheers

    Jak.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.