FRONT END PART NEEDED

Home Page › Forums › General › FRONT END PART NEEDED

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 18, 2015 at 7:42 am #391314
    Author nameAuthor names are only available to PAS members.

    Hi everyone!

    The mechanic is back and started to work on the car again. He is waiting for the rods. They were boiled and the babetts started to fall apart. Thank you all for the warning! A little extra now, saved me a ton later.

    I am in search of a front end part. I had no idea it was missing. Does anyone have the front steering linkage rod. (not sure what it is called) in the picture. I assume they are identical for both sides.

    Engine should be finished first week of April. The car starting party should be shortly after that. :)

    Thanks again to everyone. Rick

    March 18, 2015 at 8:32 am #399287
    Author nameAuthor names are only available to PAS members.

    Call John Cislak, he has several 29 parts cars at the shop.

    March 18, 2015 at 12:25 pm #399292
    Author nameAuthor names are only available to PAS members.

    If the part you are referring to is the one in the front, middle of the picture with the grease fitting on top, that connects the shock to the axle.

    Steering linkage is the bar that can barely be seen in the pic and the angled linkage in the middle is for the brakes.

    March 18, 2015 at 5:21 pm #399298
    Author nameAuthor names are only available to PAS members.

    Rick,

    You really need a better pic of what you need.

    Take the part off and photograph it.

    Or at least wrap some yellow electrical tape around the part you want before you take the pic.

    March 19, 2015 at 7:25 am #399303
    Author nameAuthor names are only available to PAS members.

    Sorry guys! I guess when you know what part it is it stands out. I will take a better pic. It is the shock rod. Rick

    March 19, 2015 at 1:37 pm #399307
    Author nameAuthor names are only available to PAS members.

    Hi Rick: Measure from mounting bolt to bolt for a correct length. The front and rear shock links are different.

    Greg Long

    March 19, 2015 at 9:19 pm #399308
    Author nameAuthor names are only available to PAS members.

    Thanks everyone. Dave murry has a shock link for my car. Thanks, Dave. :)

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.