Fuel pump diaphram sheet

Home Page › Forums › Engine › Fuel pump diaphram sheet

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 15, 2016 at 1:00 am #391789
    Author nameAuthor names are only available to PAS members.

    Can anyone point me to a source for ethanol resistant diaphragm sheet or possibly a fuel pump rebuild kit for my 845? I have finished the carb and now moving on to the fuel pump.

    Thanks, Jim

    August 15, 2016 at 8:35 am #402644
    Author nameAuthor names are only available to PAS members.

    Jim,

    I know nothing about this guy, but he lists kits. I am sure there are others.

    I got one off the AACA Forum. Lever pin was a little short. Rest was fine.

    Classic and Exotics lists this

    http://www.classicandexotic.com/store/p-868-stewart-warner-mechanical-fuel-pump-rebuild-kit.aspx

    Good luck.

    Bill

    http://www.classicpreservation.com/fuelpumpkits.html

    August 15, 2016 at 11:34 am #402650
    Author nameAuthor names are only available to PAS members.

    Egge has the rebuild kits with alcohol resistant diaphragms. See Parts & Services Directory. I recommend using the original springs not the ones from the kit. Even though the springs appear to be the same, keep them in their original position when re-assembling the pump.

    August 15, 2016 at 5:41 pm #402651
    Author nameAuthor names are only available to PAS members.

    Try these guys, Then and Now parts, they provided me with a couple of great kits, including one for a ’37 Cord, so the Pierce shouldn’t be a problem…a great source of parts, didn’t check the Parts and Services to see if they’re there, but their website should be (see what I did with grammar, there?) http://then-now-auto.com/

    August 16, 2016 at 4:10 pm #402655
    Author nameAuthor names are only available to PAS members.

    Thanks for the leads I will check them out!

    Jim

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.