Door latch bolt chrome

Home Page › Forums › Body › Door latch bolt chrome

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 31, 2019 at 3:09 pm #392658
    Author nameAuthor names are only available to PAS members.

    I am disassembling the door latch mechanisms for my 1935 845 sedan prior to sending to the plater. It doesn’t appear that the door latch bolt was ever chromed. Have others looking at original parts found this to be the case?

    Thanks, Jim

    May 31, 2019 at 6:17 pm #409858
    Author nameAuthor names are only available to PAS members.

    Forgot to add a picture.

    May 31, 2019 at 8:07 pm #409859
    Author nameAuthor names are only available to PAS members.

    It was chromed. They mar and scratch very quickly. They are very difficult to keep “perfect” even on a 100 point car.

    June 1, 2019 at 9:36 am #413705
    Author nameAuthor names are only available to PAS members.

    Yes, Ed is correct, as usual. I did a set not awful long ago and you could see the chrome remnants on the latch. I know I’m Captain Obvious, but make sure your plater knows to do just the part that shows.

    These things are fun to take apart and put back together. Hope you took some pictures of the assembly as it came apart, it’s one of those “oh, I’ll remember” and you don’t….!!

    June 1, 2019 at 2:54 pm #409869
    Author nameAuthor names are only available to PAS members.

    To be clear I am talking about the latch bolt, not the face of the frame it slides in. I was surprised when I removed the latch bolt that there isn’t a hint of any remnants of chrome or copper anywhere on this part, whereas the chrome face of the frame polished up to almost like new except for a couple of spots flaked out.

    Thanks to the miracle of no cost instant modern digital photography I took several pictures of the stages of disassembly that hopefully will be enough for reassembly.

    Yup, they are a bear to take apart particularly when thinking of how to reassemble after chroming and stay reassembled! It inevitably damages the parts. Still cogitating on that.

    Thanks, Jim

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.