- Home
- About Us
- Join/Renew
- Member Benefits
- Member Pages
- Log In
- Help
- Museum Store
Home Page › Forums › What did you do with your P-A today? › 1970’s lacquer paint
My Model C was last painted in the 1970’s. Since then the black lacquer has cracked just about everywhere. Starting about 6 years ago I have made it a winter project to freshen one fender at a time. This weekend was RF Fenders turn for some new paint. The 70’s restorer had used red nitrastain as a filler. Everywhere it was used, patches of cracks have developed. I am happy to say this is the LAST fender needing done. So off the car, stripped, blasted and ready for refinishing. That was enough fun for one day!
Looks like a very clean fender to work with, nice!
Jim,
I found body filler used about one foot up from the rear edge, in a 2 inch by 4 inch spot, just above the outer rolled edge. They pounded out a dent in this location and left it looking like an orange peel. They must only had a pick hammer and no dolly! The rest of the fender is straight. I will continue to document the results.
I remember painting (or helping paint) my 1931 Chevrolet with lacquer in 1965. The painter would spray 3 coats, then we’d sand the whole car, then 3 more, then sand….did this 5 times! Also, we were doing it in the open in an old warehouse, one of the advantages of lacquer, it dries almost immediately.
What are you going back with, single stage enamel? That’s a great approach to fixing, by the way, one fender a year….so the car stays more or less intact while working on it… David Coco Winchester Va.
The only dent.