Please help ID these linkage parts

Home Page › Forums › Engine › Please help ID these linkage parts

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 16, 2025 at 2:39 pm #481035
    Author nameAuthor names are only available to PAS members.

    Hello everyone.

    These were with a bunch of 1934 Pierce parts I purchased a couple months ago. If anyone knows what they fit I would appreciate the information. Someone went to a lot of trouble to make these. They are available if you need them

    Thanks in advance

    Pat Collearylinkage 2

    June 17, 2025 at 7:43 am #481046
    Author nameAuthor names are only available to PAS members.

    Curious, my first thought was perhaps a solid tappet plunger to replace the hydraulic, but don’t know why there is a brass piece in the middle and doesn’t look like the locks if it is for adjustment. How many are there, 16?. Measurements of the two diameters might provide clues. The smaller would be .499 if intended to drop into the cam follower body.

     

    June 17, 2025 at 8:25 am #481047
    Author nameAuthor names are only available to PAS members.

    pierce part

    I only have 4

    June 18, 2025 at 6:08 am #481060
    Author nameAuthor names are only available to PAS members.

    I think that blows that theory. Seems like it must be for some sort of pressure or flow regulator.

    June 18, 2025 at 8:20 am #481062
    Author nameAuthor names are only available to PAS members.

    Unless I am not seeing something, a throttle rod end. A variation of below:

    June 18, 2025 at 8:53 am #481064
    Author nameAuthor names are only available to PAS members.

    That is what I was thinking but it looks pretty specific. Thanks to all for your input

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.