Reply To: High Speed Rear End Gears poll

Home Page › Forums › Chassis › High Speed Rear End Gears poll › Reply To: High Speed Rear End Gears poll

March 28, 2011 at 4:50 pm #394785
Author nameAuthor names are only available to PAS members.

Bill,

The pinion must be installed to the correct depth that is specified on the end of the gear otherwise it will not work.

If the pinion is installed at the correct depth, and there is still a problem, then Phil will take care of it.

But to Ed’s experience, when they are installed to the correct depth, they work.

If you have any questions call Ed linn 248-797-8781