1931 model 42 king pins and bushing

Home Page › Forums › Chassis › 1931 model 42 king pins and bushing

  • This topic has 2 replies, 2 voices, and was last updated 13 years ago by
    Author nameAuthor names are only available to PAS members.
    .
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 26, 2011 at 10:15 am #390540
    Author nameAuthor names are only available to PAS members.

    Where can I buy king pins and bushing for my 1931 Pierce Arrow model 42 ?

    Thanks in advance.

    November 11, 2011 at 9:44 pm #395090
    Author nameAuthor names are only available to PAS members.

    Mr. Sindon: A long time ago I had several sets of kingpins made to fit 1929 and 1930 cars. They have been completely machined, but need to be case hardened, and then ground to the exact diameter. I think it is 1 inch. My email address is [email protected].

    I believe the bushings are a standard item.

    November 16, 2011 at 11:35 am #395098
    Author nameAuthor names are only available to PAS members.

    Thank you for your answer. The work will be done next Spring. I will come back to you later.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.