- Home
- About Us
- Join/Renew
- Member Benefits
- Member Pages
- Log In
- Help
- Museum Store
After 4 years of searching, I got my Archer! Now I need all the parts for the underside of the cap, the tab assembly, washer, gasket and screw. So, if anybody can help me locate these parts, that would be great. Many thanks, Frank.
Congrats on securing an Archer. When looking for that large cap, 1933 is similar but not the same as a 1932, so be careful. As far as getting a gasket, my go to source is the hardware/plumbing store. I usually get tub or sink gaskets. I have fitted my Pierce caps there. Bring your cap when you do.
I have reached out to a mascot collector/dealer to see if he can help.
In reference to Dennis’ comment about the caps being different, the ’33 Archer has a wider base than the ’32. The cap will fit either year. See photos below. Sorry I can’t help you with the parts. John Cislak may have them. Office Phone: 413/543-9017
Email: [email protected]
1932 Archer
1933 Archer
Hello Frank
Do you need the three or two prong cap? Peter Saccoccio has both. Give him a call at 401-338-3314. He is a former PA owner and a friend of mine. He supplied me with my valet cap. Real nice guy and extremely knowledgeable about mascots. Good luck
Thank you, Dennis Egan and David White! I will reach out to Peter and John and will post a photo when I get this on the car. Thanks again gentlemen you have been a great help.