3 D Printing an engine block casting.

Home Page › Forums › Engine › 3 D Printing an engine block casting.

  • This topic has 1 reply, 2 voices, and was last updated 10 years ago by
    Author nameAuthor names are only available to PAS members.
    .
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 1, 2014 at 7:02 pm #391205
    Author nameAuthor names are only available to PAS members.

    Thought the members would enjoy this video. Impressive new engine casting in less than 2 weeks for 5500.00 for the first casting, 2500.00 fro each additional. Enjoy! Ed.

    http://3dprintingindustry.com/2014/11/12/large-scale-sand-3d-printer-restores-life-1912-brush-car/

    December 2, 2014 at 4:20 am #398309
    Author nameAuthor names are only available to PAS members.

    Thank you Ed!

    I was about to write an article of making missing or destoyed antique car parts in this way. This link was very useful…!

    In fact I think in 5-10 years “we”” will be able to produce a Pierce-Arrow engine block this way.

    When I restored my car I carved out several models in wood an got them casted. The blue and the the green parts are models I made.

    Happy future! Oivind.”

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.