836 carb to tappet cover tube

Home Page › Forums › Engine › 836 carb to tappet cover tube

  • This topic has 4 replies, 4 voices, and was last updated 5 years ago by
    Author nameAuthor names are only available to PAS members.
    .
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 17, 2019 at 6:50 pm #392844
    Author nameAuthor names are only available to PAS members.

    I am missing the 1″ diameter tube that goes from the intake/air filter housing that attaches to the carb intake throat to the tappet gallery cover.

    It has a couple of minor kinks”

    December 18, 2019 at 9:58 pm #411439
    Author nameAuthor names are only available to PAS members.

    For kinky tubes, try John Cislak.

    December 23, 2019 at 7:07 am #411468
    Author nameAuthor names are only available to PAS members.

    Restoration supply California

    December 23, 2019 at 8:50 am #411471
    Author nameAuthor names are only available to PAS members.

    The tube on my ’31 seems to be a length of square-lock flex tubing. I have no idea it is original; it’s what is there.

    December 23, 2019 at 9:09 am #411472
    Author nameAuthor names are only available to PAS members.

    Thanks for all the help. A fellow PAS member helped me out.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.