Bragg Kliesrath ID Label

[Author nameAuthor names are only available to PAS members.]

When I removed the Bragg Kliesrath components from my 36, I found this label on the tank. Being this involved with the restoration/preservation I had it duplicated for re-application. I did not initially see it due to it being applied at the top of the tank. If any member wishes one(hopefully this is a near identical reproduction based on what I had to work with) Please let me know. Here is the original

[Author nameAuthor names are only available to PAS members.]

Here is the repro

[Author nameAuthor names are only available to PAS members.]

This is the info I received prior to the order from the Print Shop.

Your stickers will have an outdoor life of 3+ years outdoors. Application tape will be applied to each sticker to ensure application is incredibly easy. This tape will allow you to lift the sticker from the backing without touching the sticky side of the product. Your stickers will be individually trimmed, ready for application.

[Author nameAuthor names are only available to PAS members.]

I can see two problems with your reproduction sticker; the company name should be hyphenated, and the perimeter should be a double line vice single. If you look carefully, you can see both of these features in your pic of the original. The outer line is slightly wider than the inner and the hyphen is barely visible. Otherwise your reproduction looks identical to the original on my Model B Travelodge and I would like to purchase two from you if they can be corrected.

[Author]

Posts