drive shaft U-joints

Home Page › Forums › Chassis › drive shaft U-joints

  • This topic has 5 replies, 5 voices, and was last updated 11 years ago by Gregory Long.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 16, 2015 at 11:02 am #391295
    Michael Sulpizio

    Message deleted by original poster

    April 16, 2015 at 12:00 pm #399493
    Stuart Blair

    We obtained new U-joints for our ’36 from John Cislak.

    Give him a call.

    April 16, 2015 at 12:11 pm #399494
    Bill Lyons

    There is one on ebay

    https://www.ebay.com/itm/Universal-U-Joint-1934-34-35-36-37-38-Pierce-Arrow-NEW-/311337960225?hash=item487d304321&vxp=mtr

    April 16, 2015 at 3:11 pm #399496
    Edgar Minnie

    Cislak’s joints will fit the shaft……the other does not. Also, he uses a heavy duty USA made joint from a one ton truck, not one off a S10 Chevy. You get what you pay for. Ed

    April 16, 2015 at 3:47 pm #399500
    Bill Lyons

    It is kind of hard to find USA made anything.

    April 17, 2015 at 12:54 am #399502
    Gregory Long

    Michael: what year and model is your car? If an early car, a machinist will have to either make new joints, or rebush your Ujoints.

    If you add your year/model/engine to your signature for your postings on this forum a person only needs to put their computer cursor on the person’s name and their car or cars will show up.

    Otherwise a person has to go to the roster to look up the person’s car. or cars.

    Greg Long

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.