Fuel pump diaphram sheet

[Author nameAuthor names are only available to PAS members.]

Can anyone point me to a source for ethanol resistant diaphragm sheet or possibly a fuel pump rebuild kit for my 845? I have finished the carb and now moving on to the fuel pump.

Thanks, Jim

[Author nameAuthor names are only available to PAS members.]

Jim,

I know nothing about this guy, but he lists kits. I am sure there are others.

I got one off the AACA Forum. Lever pin was a little short. Rest was fine.

Classic and Exotics lists this

http://www.classicandexotic.com/store/p-868-stewart-warner-mechanical-fuel-pump-rebuild-kit.aspx

Good luck.

Bill

http://www.classicpreservation.com/fuelpumpkits.html

[Author nameAuthor names are only available to PAS members.]

Egge has the rebuild kits with alcohol resistant diaphragms. See Parts & Services Directory. I recommend using the original springs not the ones from the kit. Even though the springs appear to be the same, keep them in their original position when re-assembling the pump.

[Author nameAuthor names are only available to PAS members.]

Try these guys, Then and Now parts, they provided me with a couple of great kits, including one for a ’37 Cord, so the Pierce shouldn’t be a problem…a great source of parts, didn’t check the Parts and Services to see if they’re there, but their website should be (see what I did with grammar, there?) http://then-now-auto.com/

[Author nameAuthor names are only available to PAS members.]

Thanks for the leads I will check them out!

Jim

[Author]

Posts