pot metal frame for clcok in dash

Home Page › Forums › General › pot metal frame for clcok in dash

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 18, 2010 at 10:31 am #390250
    Author nameAuthor names are only available to PAS members.

    I have a 1924 series 33 that has the pot metal frame broken where the winding stem threads into the base of this 4″ dia. waltham clock. The clock and winding stem are perfect.

    any suggestions. O.G. Wilson”

    February 18, 2010 at 9:09 pm #393996
    Author nameAuthor names are only available to PAS members.

    clean metal very well, apply some JB Weld, then re-thread. Other than machining an entire frame, that’s worth a try. best- David Coco Winchester Va.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.