Stewart-Warner Braking System 1933-1935

Home Page Forums Chassis Stewart-Warner Braking System 1933-1935

  • This topic has 3 replies, 3 voices, and was last updated 11 years ago by .
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #390911

    To the member asking for information on the Stewart-Warner Braking System:

    Order a copy of PAS Service Bulletin 74-1 which is a reprint of a very good S-W manual on that system. (Note: The discription of PASB 74-1 is mislabelled on the order form.)

    #396372

    Thank You will do so

    #396373
    #396421

    Thank you, Mr. Lyons and Johnson

    The website information indicates that the operating shaft is sealed with a replaceable cork seal. As my unit leaks profusely from this area I would assume the seal is defective. Wont know till the unit is dissembled. Would wish to correspond with members who have experienced refurbishing this unit.

    http://[email protected]

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.