by Bob Dison
I'm in need of the headlight switch for a 1933 836. This is the unit that attaches to the bottom of the Ross steering box and is actuated by levers on the steering wheel. My switch was missing when I bought the car and a PAS member was kind enough...
Wanted Cars & Parts / Primary / New
by Herbert Tull
Looking for two "dead" coils to fit a '29 Pierce, mounting through the firewall with a three bolt flange. A good exterior can and flange are needed go reinstall the unit after reconstruction. One of my original coils failed, so I "repaired" it inserting a new 6v coil into the...
Wanted Cars & Parts / Primary / New
by Bob Jacobsen
I would like to buy three or four 17" wire wheels with the rolled edge. Thanks
Wanted Cars & Parts / New
by John Kelso
Radiator cap needed, hole for motometer is ok. Also, cylinder plugs for the primers. Can trade a set for the spark plugs. Lastly, a front splash apron (between the fenders and ahead of the radiator). Thanks
Wanted Cars & Parts / Primary / New
by Herbert Tull
Vintage Veteran BRAKE Repair Manual by Perham, first published in 1980, covering brake systems and practices used from the very early days of the automobiles, up to about 1935. Recommended repair and adjustment practices are explained clearly. Three shoe Bendix systems used by Pierce are explained more thoroughly than any...
$20.00
I need one front-center clamp for my Series 43, to replace one lost at the plater. I have one side clamp which has been plated but is slightly larger than those on my car; maybe it fits a Series 42, but if anyone can identify it and needs it, let...
Gerald Marc Hamburger of Atlanta GA, passed away peacefully on March 7, 2023 at the age of 80. Marc was a true gentleman who was passionate about life and all that it offered. He was a devoted husband to his wife, Deedee, and an adoring father and grandfather to his...
New Fitzgerald #3897 manifold gasket.
$40.00
"Tail of the Arrow" Reproduction bronze casting. Decent chrome, 2 available.
$250.00
$375.00
Nice chrome, ready to install. Sold as a set.
$600.00
Reproduction bronze castings. Nice chrome. Set of 6
$900.00
Pair of re-chromed tail light brackets. Chrome is okay for driver. Sold as a pair.
$600.00
New, clean, no damage. N.O.S..
$200.00
New gaskets, fits models 32, 33, 36. Victor #390, Fitzgerald #302
$200.00
I have a lot of side mount hardware for the 8 and 12 cylinder cars. This is just a few of what I have, please call with your needs.
I have a lot of radiators, some good, some can be used for parts (for tanks/ necks). I have radiators for 1929 - 32, 1934 - 35, and 1934 836A. I also have a bunch of grille surrounds and louvers. Please call with your needs.
Over the years I have made pipe and muffler hangers for most year cars 1929-38. All are exact copies of original parts. If you need a pipe or a muffler hanger set please give me a call. This is a small sample of what I have made over the years.
I have distributors, new caps + rotors, used caps + rotors, and other ignition parts. I also offer distributor set up and rebuilding service. Please call with your needs.
I still have a few sets available for the 1925 - 1932 8 cyl cars. These are correct as installed at the Pierce-Arrow factory.
$52.00
I have a large inventory of 8 and 12 cylinder crankshafts. If you're rebuilding an engine, there's no need to grind a crankshaft. I have .030 - .060 undersize. I also have the rest of the engine parts available. Please call with your needs.
I have lenses available for 1931-1932, 1933-1934, 1935 and 1936-1938. Sold in pairs. Also have Aux/Running light lenses available. I have 1933 -34 left side only headlight lenses available too.
These are new made many years ago. No longer available. Really nice. If interested please call.
I made a few of these years ago. Still have some available if someone needs one. The arm will fit 8 and 12 cylinder distributors. Please call.
Original reconditioned water jackets. Copper plated, new brass baffle. Ready to paint.
$350.00
I have good crack-free heads available for 8 and 12 cylinder Pierce-Arrow engines. All heads are sand blasted and crack tested. Please call.
I still have a few stainless battery trays and side plates left over from a past project. I also have some original battery boxes. Please call.
Perfect reproductions. Show chrome. Made years ago for a club member. 2 brackets for 1 sun visor. I have 2 sets.
$300.00
I have many lights and some extra lenses available for most years. Please call me with your needs.
by Bob Jacobsen
For sale, a pair of 1932 (one year only Pierce-Arrow V12) Stromberg E-2 Carburetors, with throttle connecting shaft and gasoline fittings. These carbs came off my 1933 V-12 (mounting holes slightly elongated to fit 1933 bolt centers), ran fine, but incorrect for 1933 (replaced with EX-32's). Excellent condition, very rare,...
Steve Rossi received the following inquiry from Dwight Heinmuller and asked me to post it on the Emporium system: "I sell Packard parts. However, a customer of mine in India is looking for a bell housing for a 1930 P-A Model A 7-pass. touring, right hand drive. Can anyone direct...
William C. McKinney, a longtime member of the Pierce-Arrow Society, passed away on February 13, 2023 at the age of 89. Bill was born in Salem OR, attended Salem schools, graduated from Willamette University and Willamette Law School. He was an Eagle Scout, a flying instructor in the Air Force,...
Looking for a parts manual for a 1920 Series 51. A copy is just fine.
Offering this Pierce-Arrow bulb horn. It is in excellent condition though lacking the conduit and the back half of the steering column clamp. Oddly, it has a Packard script bulb on it but it is identical to the horn used on my 1917 Model 48. These horns were used for...
$1,250.00
by Art Lee
Looking for a complete running Series 80 motor for 1926 7 passenger car. My motor has so many problems that it would cost more to repair than the car is worth. If not successful, I will probably rod the car with a modern straight 6 and compatible manual transmission.
Two Gauges in great condition. I assume they are Pierce but don't know, Selling both together or separate. $300.00 for the pair or $150.00 separate. These gauges are Rochester Mfg.
$300.00
Two Pierce clocks one dash and one rear seat, not sure of the years or models. Also have three eight day Waltham clocks. Selling all five in one lot for $250.00 /OBO plus shipping costs. If interested text me.
$250.00
by Bill Valela
Rear fender trim spears. Reproduction, 6 spears in total.
$300.00
by Bill Valela
Oil filler cap from 1934 v-12. I believe it fits v-8 as well.
$30.00
by Bill Valela
Throttle linage. Don't know what it is off of.
$10.00
by Bill Valela
I believe this is off of a V-8, uncertain of the year.
$40.00
by Bill Valela
I believe this is from a 1934 V-12. Complete linkage. See stamped part number.
$250.00
$100.00
by Bill Valela
I believe this is out of a V-12 1932 car. It is stamped "P5". Don't know what that might mean. Face is in good condition, no cracks.
$75.00
by Bill Valela
Out of a 1932 car. Just the two bezels and one handle which is cast aluminum.
$50.00
by Bill Valela
I believe these are from a 1932 car. Small dents are visible in the bellows. The covers show multiple cracks around the perimeter.
$150.00
by Bill Valela
I believe this is out of a 1932 car. They are glass.
$150.00
$200.00
by Bill Valela
I believe these are out of a 1932 car.
$40.00
by Bill Valela
I believe this is off of a Seagraves fire truck. Willing to donate if there is anyone that would like it. Prefer to do that rather than sending it to the scrap metal yard.
$15.00
I found this gas cap on eBay and quickly bought it before reading the description and realizing it is much larger than the one I needed for my 31. This one is 4-1/2” diameter and about 3/4” high. This is a driver quality cap with a few dents and some...
$150.00
Nice original grease tin in untouched condition. This is roughly a 7” cube and has a few dings as can be seen in the photos. I’m asking $500 or a reasonable offer. Thanks for looking!
$500.00
The OPTIMA 6v Red-Top Battery Deal is Going to Start For ONE-WEEK in JUNE! As usual at this time of year, I pursued Optima Jim about offering Members of the PAS a DEAL on the Optima Red-Top 6V battery. It did not happen Last Year, but This Year, Optima Jim was able to offer a DEAL to the PAS...
$167.50
Long held original paint survivor in Brewster Green with Black fenders. Our family has owned this car for over 30 years and it has always been well garaged. The body is straight and the frame is smooth and clean and has never been pitted by rust. The car has an...
$20,000.00
by Steven Rossi
“The Story of Pierce-Arrow: A Photographic Trip through the Pierce-Arrow Factory showing the uncommon methods which distinguish the building of America’s finest motor car.” An oversize, deluxe catalogue printed in 1931 and reprinted in 1977 by the Pierce-Arrow Society. Leatherette covers. 72 pages plus covers. 13 1/2 inches by 10...
George H. Quay III of Chagrin Falls Ohio has passed away at the age of 82. Loving father of Jeanine (Matt) Domonkos and George H. IV (Kerri); dear grandfather of Ashton and Braden Hunt, Eva Domonkos, George H. V and Timber Quay; brother of Patricia Lybarger and the late Marjorie...
by David White
1932 Model 54 Cub Brougham The car is in great shape for its age. One repaint in the 1950's from green to black. There are cracks in the black showing the green underneath. Original drive train-engine has numbers on it. Looks to be the original interior, even the floor boards have...
$40,000.00
Looking for a speedometer cable and housing for my 1936 Pierce 8.
One side mount bracket. No sure but this my have come from a Series 80 Runabout, there were several in family. Please E-mail me.
$90.00
5 1/2 Diameter 13/16 Bore in box never used. One of a number of things in my boxes. Please E-mail me response
$75.00
Frank Mossberg diamond script valve compressor. $30.00 Plus Shipping E-mail response
$30.00
by David White
1933 Pierce Arrow Model 1236 4-dr sedan. Car NO. 33617286. This was the second Pierce Arrow 12 owned by Mr. Forrest Garb. (It replaced his first Pierce Arrow, a 1934 Model 1240, after a tragic fire.) This beautiful Pierce is finished in Ruby Red with Silver metallic body side panels....
$79,000.00
Rebuilt water pump. New shaft, new bushings set up with modern seals. Housing sand blasted and painted, ready to install. New seals in grease cup. Ready to run. Sold outright or exchange. Call for pricing.
Rebuilt water pump. New shaft, new bushings set up with modern seals. Housing sand blasted and painted, ready to install. New seals in grease cup. Ready to run. Sold outright or exchange. Call for pricing.
Originals as removed. Good studs on the backs. Sold individually.
$85.00
I've made a few extra sets of exact copies of the original oil line plus the special long fitting. These fit perfectly with an original or with my replacement oil filter. Lines are ready for chrome plating. Line set $175. Fitting sold separately.
$175.00
Very nice, clean, straight, 43 3/8" long, no dents, original, like new.
$700.00
This is the correct oil line feed fitting.
$30.00
These are needed if you're going to re-chome your grill louvers. Sets include a stainless pin for each end of the louvers and the brass pivot pins for the tie bars that operate the louvers. 1932 Sets - $98.00, 1933 - 1935 Sets - $98.00, 1936 - 1938 Sets -...
$84.00
I have a few sets of exact copies of the original plate brackets available. These mount on the bumper spring bar behind the front bumper.
$150.00
$100.00
New reproduction exhaust manifold. Machined, hi temp coated. Set up on intake. This was run for a short time in a customer's car. Please call for price.
2021 22 foot tailwind with 6000# torsion axles and extra height ceiling. Practically new with less than 500 miles on it. The interior box measures 22 feet. Ramp opening is 8 feet. Width between inside fender wells is just over 80 inches. Was ordered specifically to haul Tom's 1919 Pierce-Arrow...
$22,500.00
by Liz Horne
Great lightweight all-weather jacket These sold out at Hershey! Get yours while you can! CLICK HERE TO ORDER ONLINE Water resistant finish LINING: 100% polyester mesh in upper back 100% 240T polyester, 2.7 oz./yd2/90 gsm Roll-away hood Vented back yoke Adjustable cuffs with velcro tabs Adjustable shockcord at hood and...
$59.95
WANTED 1 SET OF BRAKE SHOE SPRINGS 1931 PIERCE ARROW CALL ROBERT BARROWS 540-473-3661
by Jim Follis
Appears original I have not seen it run some parts may be missing
$10,000.00
Quality T-Shirt in Maroon with Museum Archer logo. M-L-XL 2XL $18.00 plus $3 shipping Order at Museum website: pierce-arrowmuseum.org OR Call Dave Stevens with credit card info at 231-740-3610 OR Send check and info to "PAS-GAG MUseum Projects" , PO Box 309, Whitehall, MI 49461-0309
$21.00
A Pierce-Arrow Museum fundraiser. Black visor with "PIERCE" embroidery is a unique limited quantity item. Quality visor with easy one hand velcro adjustment. $20.00 plus $3.00 postage. Order at pierce-arrowmuseum.org website, call Dave at 231-740-3610 with credit card & info or send check to: PAS-GAG Museum Projects, PO Box 309,...
$23.00
by Jim Follis
This 1926 Series 80 truck conversion is rough and not complete. $3,000 OBO
$2,000.00
by Jim Follis
Restored 1926 Series 80 sedan, almost complete.
$40,000.00
$10,000.00
This is the large 10" x 14-1/2" color sales folio of the cars for 1931. Pierce offered small 5" x 7" versions of these, specializing on single lines of the cars, like Salon only, or Group A only, etc., with fewer pages. If you have not seen the large deluxe...
$150.00
by Bill Valela
1932 Club Brougham. all the different components required are included along with each terminal labeled for easy installation.
$700.00
by Bob Jacobsen
Would like to buy one 1933 side mount tightener as shown in the attached photo. The dimension shown of 17.5" from the tip of large arm to center of the arm pivot pin is necessary and the proper length for 7.50-17 tires on models 1242 and 1247 P-As. Models 836...
Very nice clean set of wheels. Little to no pitting on hubs and spokes. They will paint up with minimal work. I also have drums if needed.
Here is some of the many springs I have made over the years. Most are still available. If there is something you need, please call. Distributor cap, rotor and cap carbon, hood door, radiator hose, V-12 throttle return, valve springs, horn button, oil pump pressure relieve, headlight reflector, 1933-35, 1931-32,...
I have some replacement pumps, NOS and used, for all 8 and 12 cyl cars. I also have some parts rebuild kits and offer a rebuilding service. Please call if you're interested in anything.
This is a painted frame. It never had any chrome acids inside of it to rot it out. It does have rust pits on the outside but no rot holes. Please call if you're interested.
$950.00
Nice clean, minimum rust and pitting, no bends or dents. Complete. Does have 3 replaced louvers. Please call if you're interested.
$750.00
Complete, no bends or dents. Please call if you're interested.
$650.00
No dents or bends. Does have 2 repairs in the upper corners, easy fix. Please call if you're interested.
$150.00
Decent shape as removed. Please call if you're interested.
$150.00
Re-chromed. Not show quality but great for a driver. No repairs, bends, dents, or cracks. Please call if you're interested.
$650.00
Straight, no dents. Does have small cracks in the corner, easy fix. Please call if you're interested.
$450.00
Complete straight grille, no dents or bends. Does have some pitting on the lower section. Louvers are pretty clean. Please call if you're interested.
$650.00
Brass set of 12 Cyl water jackets, will not rust or rot. Ready to install. Perfect Condition $875.00
$875.00
Very nice used shape cleaned ready to install will not rust out. $750.00
$750.00
Full setup for 1931 - 1932 Pierce Arrow Headlights. Nice reflector. All hardware. Both pot metal rings have one crack. Chrome ring is perfect. One has a small bend. Sold as pair. $950.00
$950.00
This is a new reproduction part, comes with brackets. Last one. $250.00 + $40.00 Shipping.
$250.00
I have 10 new old stock Victor head gaskets, fits 4 cyl models WC WD RD RE RF RG & R10. Please call if you can use one.
I have 4 N.O.S. gaskets available. Please call if you can use one.
1925 - 1929 Pierce-Arrow truck NOS Victor head gasket. Fits 4 Cyl X5, XA - XB, (Vic # 79/516). Anyone who may want or need these please give me a call, I have 6.
This fits all 1929 and 1930 Model A & B and 1931 Model 41 & 42. This does have a few minor dents in the tube. $375.00 + $25 Shipping
$375.00
One year only. Nice shape, no dents. Condition is original as removed. $550 + $16 Shipping
$550.00
New chrome, completely disassembled. All new chrome cap clips re-plated, new points + condenser set up and timed on distributor machine. Ready to run. Call for details.
1936 - 1938 Owen Dyneto Starter C0-1309. Completely rebuilt . New brushes, new starter drive, correct plating, new date tag. Completely disassembled, blasted, primed, and plated. Show Quality. Price $1,650.00 + $48.00 shipping.
$1,650.00
Full set with all hardware with keys, need to be re-chromed. $200.00 + $10.00 shipping.
$200.00
1932 hood door knobs. Sold as a pair. Used original knobs to open hood. $60.00 + $6 Shipping
$60.00
$20 each plus $5 for tube & postage in USA or combine with any of our other advertised Pierce posters for big savings. Save big with this Holiday Special: Any 3 for $50 or 7 for $100 in tube with free postage in USA only until Dec. 24, 2021! Free...
$20.00
1933 - 1938 Pierce-Arrow 8 Cyl water pump drive. Complete with new couplers original correct hardware plated like originals, painted ready to install.
$250.00
I have good rebuildable cores for 8 and 12 cylinder engines. Please call with your needs.
I have reproduced the top half cover for the headlight switch mounted on the steering box. 3 available, $150.00 each.
$150.00
We rebuild water pumps, carburetors, steering boxes, transmissions, engines, etc. I have been restoring cars for 29 plus years working mostly with Pierce-Arrows. Most people know me through all the parts I make. Some may not know all the Pierce-Arrow components that I rebuild every year. If you need any...
New correct running board trim available in aluminum or brass, exact reproduction, includes pieces between the running board and fenders, as well as between the splash apron and running board. Price is $550.00 per set plus shipping.
$550.00
I just finished making new oil lines for the late 8 cylinder engines. Nice clean bends ready for plating. Each line is test fit on an engine to ensure proper alignment. Lines sold with or without cast ends. Call for price.