Westinghouse air shocks/springs

Home Page › Forums › Chassis › Westinghouse air shocks/springs

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 24, 2011 at 12:20 pm #390447
    Author nameAuthor names are only available to PAS members.

    Does anyone have any information on the care and feeding of Westinghouse air shocks/springs for a 1914 Model 38?

    Thanks

    March 24, 2011 at 6:23 pm #394772
    Author nameAuthor names are only available to PAS members.

    Ralph: The Arrow Series 85, Model 2 (85-2) pages 18 to 23 has very detailed information on the Westinghouse Air Springs. Also, the late Henry E. Becker had a small booklet reproduced on the service of the air springs. Possibly a member who has a copy can have it duplicated for you.

    March 24, 2011 at 11:38 pm #394773
    Author nameAuthor names are only available to PAS members.

    Ralph: I should have mentioned to check under “Member Pages”” “”Back Issues”” to get a copy of The Arrow 85-2.”

    March 26, 2011 at 12:31 am #394777
    Author nameAuthor names are only available to PAS members.

    Ralph: I have the Becker booklet back in Minnesota, but I won’t be back up there until May. If you haven’t found a copy by then, let me know and I’ll copy it for you.

    March 26, 2011 at 11:47 am #412211
    Author nameAuthor names are only available to PAS members.

    Hi Ralph,

    The “Becker booket” was reprinted in PASB 86-1. As Paul J. points out, back issues are available via the “Member Pages -> Back Issues” page…

    Paul Morris

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.