Wiring Harness Ferrules & Headlight Lens Wire Retainers

Home Page Forums General Wiring Harness Ferrules & Headlight Lens Wire Retainers

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #391386

    Has anyone found a source for the flared ferrules that are used on the ends of the metal flex tubing in a wiring harness? I looked in McMaster-Carr, but didn’t see appropriate ferrules.

    Does anybody know where I can get the appropriate headlight lens wire retainers for an early 8 cylinder Pierce? I looked at some Model A lens retainers and they are not deep enough for a 1931 Pierce headlight rim.

    Thank you,

    John

    #399854

    John,

    Did you check Restoration Supply?

    Check page 10 for the clips and 11 for the ferrules.

    Bill

    http://www.restorationstuff.com/pdf/RestorationSupplyCompany.pdf

    #399855

    Bill,

    Yes, I checked them first. I didn’t see a flared end ferrule in their offering.

    I have to talk with them on the lens retainers since they don’t show a photo or dimensional information, but most places carry Model A retainers. I was hoping somebody might have bought a set from someplace that they didn’t have to modify to work.

    Thanks,

    John

    #399856

    John,

    The ferrules from Restoration Supply don’t work, for either end of the conduit. Jim

    #399858

    Call Beth at Restoration Supply. I have known Beth and Allen for years, and ask them for a source. They will help you in any way they can.

    #399860

    Contact Rhode Island Wiring.

    They sell the flex conduit and the ferrules.

    I think that their website is RIWIRE.com.

    #399861

    Restoration Specialties and Supply, Windbar, PA has a wide variety of these items. Their catalog is on-line.

    #399866

    Bill, thanks again!

    Jim, you are correct for the frame junction box usage.

    **If anybody is looking for flared ferrules to use with the frame junction boxes, something on the attached link should do the trick (hopefully).**

    Tony, I will call Beth in the next couple of days about the lens clips.

    Peter, I might be able to use the straight ferrules that they offer for part of what I am doing. I think Restoration Supply has these straight ferrules as well.

    Paul, I didn’t see anything online from them concerning ferrules or lens clips but, some of their weatherstrip will probably work on an exterior trunk I am trying to restore. It has been 10+ years since I used them and I had forgotten them, thanks!

    http://www.ferrulesdirect.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=FD&Category_Code=UNFERR

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.