Spring Gaiters

Home Page › Forums › General › Spring Gaiters

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • July 5, 2015 at 2:56 pm #391408
    Author nameAuthor names are only available to PAS members.

    I have heard the term ” spring gaiters “”. I have no Idea what they are or where they are used. My Series 133 Is supposed to have them

    Thank you

    Bob Krauss”

    July 5, 2015 at 3:00 pm #400017
    Author nameAuthor names are only available to PAS members.

    Hi Bob,

    I think that this is synonymous with the steel segmented covers over the leaf springs.

    Happy Motoring,

    Chris

    July 5, 2015 at 3:03 pm #400018
    Author nameAuthor names are only available to PAS members.

    They may be leather, or as Chris says metal. I attached a site for the leather ones. My 836 has metal ones.

    http://starship.org/Bugsby/Adventures/2006/SeriousFreshening/Chassis/Gaiters/index.php

    July 5, 2015 at 3:06 pm #400019
    Author nameAuthor names are only available to PAS members.

    Here is some info, from a “lesser”” car site. They basically keep dirt out and oil/grease in on leaf springs.”

    http://www.packardclub.org/forum/viewtopic.php?f=6&t=2105

    July 6, 2015 at 4:24 pm #412730
    Author nameAuthor names are only available to PAS members.

    Thank You for the Information. Now for the next question. What are the proper “gaiters” for a 1929 series 133, Brougham. Would they be metal or leather or does It matter as long as you have them for judging purposes.

    Bob Krauss

    July 8, 2015 at 12:21 am #400038
    Author nameAuthor names are only available to PAS members.

    I put leather on my 1930 model C, I believe that 1929 and 1930 used leather, and then Pierce went to metal. The leather gives an interesting and “official – old car”” look to it. Most restorers went to metal. The term ‘gaiter’ refers to leather.”

    July 8, 2015 at 6:59 pm #400044
    Author nameAuthor names are only available to PAS members.

    Were the spring covers an option or were they standard on all PA’s?

    I ask because I have never seen nor heard of any type of spring covers on our very original ’29 that was purchased by my grandfather in the early 60’s.

    The car was purchased from someone who ‘flipped’ the car having purchased it cheaply from the original owner so the car has pretty much only had two owners.

    July 8, 2015 at 9:02 pm #400046
    Author nameAuthor names are only available to PAS members.

    I checked my ’29 parts manual and I didn’t see any reference to spring covers and they were not shown in the assembly drawing for the springs. I conclude that they were a dealer added item.

    If that’s true then IMO there should be no deduction if they are not present.

    Bill

    July 8, 2015 at 11:58 pm #400048
    Author nameAuthor names are only available to PAS members.

    I believe I found them in my parts catalogue for 1930 by reading every line in the book. Descriptions are not always clear. I think I also found reference to them in the 1929 catalogue, but it has been years Rick Leroy has the best part of my lirary and my be interested in looking for them himself – he is restoring a 1929 model.

    July 9, 2015 at 4:51 pm #400051
    Author nameAuthor names are only available to PAS members.

    Here is the listing from the RROC for leather gaiters.

    Gaiters, Leather Boots:

    Rudy Rosles

    800-248-RUDY

    Custom Made Gaiters, Leather Boots, Fabric couplings

    Cleveland, OH

    Also sells Prewar R-R parts

    July 9, 2015 at 6:07 pm #400053
    Author nameAuthor names are only available to PAS members.

    I bought mine from Rudy. Good job. Measure carefully – he is exact.

    July 9, 2015 at 11:39 pm #400056
    Author nameAuthor names are only available to PAS members.

    Here is a photo of a 29 that may be the most original car at the meet this year, a never before seen 29 sedan. It will run for the first time in about 25 years tomorrow.

    July 10, 2015 at 10:24 pm #400057
    Author nameAuthor names are only available to PAS members.

    Here is a shot of the all original 29………..it may be the most original 29 that has survived. Only the wheels were painted back in the 70’s. It ran today for the first time in 25 years. There was a large local get together tonight, we arrived a half hour late. Car ran perfect with no shake down. We didn’t even have time to put the hood or side mounts on it. Be sure to look it over at the meet in Buffalo next week.

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.