Horn & parking light bracket

Home Page › Forums › Body › Horn & parking light bracket

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • August 29, 2015 at 8:09 pm #391461
    Author nameAuthor names are only available to PAS members.

    I have three options for the drivers side horn bracket on my 1934 840A.

    None of them fit. A & B are not bent correctly so the holes don’t line up. C is shaped just right to make the holes line up, but its 1″ too short. Does anyone know what is going on here. The bracket on the passenger side fits just fine….??

    I appreciate the help…..Rich Anderson”

    August 29, 2015 at 8:10 pm #400311
    Author nameAuthor names are only available to PAS members.

    Here is another photo of the underside of these brackets.

    August 30, 2015 at 9:33 am #400313
    Author nameAuthor names are only available to PAS members.

    Richard, Greg Long had a pile of them for sale at the Pierce Meet. Give him a call he may have the one you need. Karl

    August 30, 2015 at 12:12 pm #400314
    Author nameAuthor names are only available to PAS members.

    Thanks, I’ll do that. When I figure out which one that is…..

    August 30, 2015 at 2:39 pm #400317
    Author nameAuthor names are only available to PAS members.

    Richard,

    I think they are the same as my ’33, which is A. Do any of the holes line up? If so which ones. I assume that the 2 hole side (radiator side) lines up? My guess is the finder bracket or frame is tweeked.

    Bill

    August 31, 2015 at 1:27 am #412755
    Author nameAuthor names are only available to PAS members.

    Bill……the radiator holes do not line up when the fender holes are in line. Bracket C lines up perfectly but is 1″ too short. The other brackets are long enough, but when the fender holes are in alignment, the radiator holes are off at the radiator shell ???

    Both fenders are level with each other….so do not seem to be tweeked.

    Very perplexing….

    August 31, 2015 at 12:13 pm #400321
    Author nameAuthor names are only available to PAS members.

    Could C have been shortened on pupose to fit a modifird fender? It looks like it has been ‘messed with’ from the picture you sent.

    August 31, 2015 at 8:45 pm #400322
    Author nameAuthor names are only available to PAS members.

    Bill,

    I think you have very sharp eyes. I don’t think that there is room to mount the horn under the C bracket

    Bill

    August 31, 2015 at 9:06 pm #412756
    Author nameAuthor names are only available to PAS members.

    Looking closely at bracket C……it has been cut,& welded….probably shortened. It is exactly what I need but 3/4″ short when mounted on the fender. Anyone have a good 1934-35 drivers bracket that will work ??

    Thanks,

    September 2, 2015 at 3:04 pm #400325
    Author nameAuthor names are only available to PAS members.

    Richard,

    I think this is the wrong side.

    http://www.ebay.com/itm/1933-1934-PIERCE-ARROW-RH-CHROME-PARKING-LIGHTS-HORN-MOUNT-/141763508155?hash=item2101c377bb&vxp=mtr

    September 3, 2015 at 12:42 am #400327
    Author nameAuthor names are only available to PAS members.

    Bill……your right, I need the left (drivers) side bracket

    Thanks,

    Rich

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.