Series 80 Rear Hub Puller

Home Page › Forums › Literature and Tools › Series 80 Rear Hub Puller

Tagged: , ,

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 2, 2022 at 6:21 am #469514
    Author nameAuthor names are only available to PAS members.

    Hi; I’m looking for a rear hub puller to enable brake inspection and repair. If anyone has thread and dimension specifications and will share,  I have a machinist buddy who has offered to knock one out for me.

    May 2, 2022 at 12:32 pm #469516
    Author nameAuthor names are only available to PAS members.

    Randy

    You can have your machinist buddy come measure you hub directly with a micrometer and a thread gauge. Measure the hub first with a ruler or tape, so he will know what size micrometer to bring.

    Attached are two pictures of hub pullers from my copy of the “Pierce Authorized Maintenance Equipment” book. There are no page numbers, but you can see the different concepts. The Thomason type will be the most versatile, as you can mThomason Type Hub PullerakThomason Hob Pullere it work with either of your cars by having two different thread inserts made.   Good luck with the essential task of reworking the brakes.   Herb Tull

    May 2, 2022 at 4:46 pm #469517
    Author nameAuthor names are only available to PAS members.

    Randy the correct puller for your Series 80 is 3 inches 16 threads per inch. Karl

    April 29, 2023 at 8:12 am #477274
    Author nameAuthor names are only available to PAS members.

    Randy,

    I have a Very Nice one that I MAY BE Willing to LOAN YOU, but you will have to Guarantee that I will GET IT BACK!

    You would have to send me the TITLE to your car, just in case, or your First Born Son!

    HA! HA!

    Let me know and we can work out a plan.

    Best regards,

    Peter

    August 26, 2023 at 5:23 pm #477906
    Author nameAuthor names are only available to PAS members.

    Randy,

    Did you ever get a hold of a hub puller?

    Peter

    June 9, 2024 at 6:45 am #479450
    Author nameAuthor names are only available to PAS members.

    Hi, Peter, I have not. I had plenty of time to look for a tool but haven’t run across one. Sooner or later I will have to get serious about it.

    I hope all is well with you! RR

    July 5, 2024 at 11:19 am #479549
    Author nameAuthor names are only available to PAS members.

    I have s new hub puller! Thanks everyone for you help and advice. You’re the best!

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.