1926 Pierce Model 80 Plug Wires/Connectors

Home Page › Forums › Engine › 1926 Pierce Model 80 Plug Wires/Connectors

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 10, 2021 at 7:51 am #464975
    Robert Bork

    Looking for help re my 1926 Model 80 6 cylinder flathead Plug Wire Connectors.  Does anyone have any pictures and know where I can get the Pierce correct plug wire connectors for the plug and distributor side of the wires?   Any help would be appreciated.

    Thanks,

    Rob Bork

    April 11, 2021 at 1:38 pm #465023
    Peter Williams

    Rob,

    Those connectors are pretty standard for old cars that had distributors.

    You need to go to Restoration Supply to find most of what you need.

    Below is a link to get you close to what you are describing.

    Questions?  Post them.

    Cheers,

    Peter

    https://restorationstuff.com/shop/#fb0=5

     

    April 12, 2021 at 5:29 am #465027
    Robert Bork

    Thanks Peter!  Will give that a try.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.