1937 Brakes

Home Page › Forums › General › 1937 Brakes

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 8, 2016 at 8:30 am #391689
    Author nameAuthor names are only available to PAS members.

    Hello – Can someone point me to where the brake fluid reservoir is – I am assuming the fluid is low as the brakes are soft – Thank you Chris Rence

    May 8, 2016 at 11:10 am #401930
    Author nameAuthor names are only available to PAS members.

    Vacuum Based operation. There are tanks in the rear of the car by the frame, drivers side. There is also a long tube in the frame from those tanks to the firewall that connect to the Bragg Kliesrath valve. I found a leak in mine where the tube comes out of the frame at the bend were it been rubbing for unknown timeframe causing a hole. Need to test system to see if has leaks or other issues.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.