Clutch Spring

Home Page Forums Engine Clutch Spring

  • This topic has 1 reply, 2 voices, and was last updated 8 years ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #391462

    I have a 1932 Club Brougham that has the clutch pedal with a shaft coming off the pedal assembly where a spring would attach to pull the pedal back. What I don’t know is where it attaches. I thought maybe it attaches to the battery box but I am uncertain. I know some clutch assemblies have a spring that wraps around the shaft that holds the pedal but mine doesn’t have this. There is a spring on the end of the shaft but it is used to hold the clutch and brake pedal against one another. I tried to attach a photo but can’t figure out how to make that happen.


    The shaft attaches to a small lever at the back of the transmission. There is a spring on either side of the lever. The shaft parallels the battery box and left side of the trans.

    Greg Long

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.