Engine stand

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #470818

    I have been trying to come up with a way to move my engine around and be able to work on the top end and valve tappets.

    I decided to use the mounting brackets and came up with a dolly setup.

    Trip to Home Depot yielded dollies, 1 1/2″ pipe flanges, 6″ x 1 1/2″pipe nipples, 8″ nuts and bolts and a couple of heavy washers.

     

    Here is how it looks assembled. I could probably get by with a 4″ pipe nipple, but I wanted to be able to get the pan off if needed.

    Probably will need some right to left and front to year bracing

    We’ll see how this works

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.