Grommets for Spark Plug Wires

Home Page Forums Engine Grommets for Spark Plug Wires

  • This topic has 2 replies, 3 voices, and was last updated 15 years ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #390151

    I want to replace the rubber grommets (8 round ones and 2 oblong ones) for the spark plug wires on my 1932 eight cylinder. Can any rubber grommets be used, or do they have to be made of a special, high temperature rubber? Where can the correct grommets (especially the two oblong ones) be purchased? Thanks.


    Regular grommets for the round holes are OK.Local hardware should have. Nothing special. I used small rubber tubing like vacuum hose sliced lengthwise on one side and formed oblong to fit the oblong hole.


    You may find that larger round gromets will assume the oblong shape when forced into the holes.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.