Inside sun visor

[Author nameAuthor names are only available to PAS members.]

I am making the missing parts for my inside sun visors on my 1930 EDL. I am missing half the clamp that connects the visor to the bracket. This is marked Tiffany. I need pictures or dimensions. I have the part with a flat spot. I assume the other half is a half round. I also need the dimensions of the visor itself. See pics.

[Author nameAuthor names are only available to PAS members.]

Good morning Jim –there was quite a long discussion on this message board a few months back. Here is a photo of Tiffany visor. A couplr more photos to follow.

[Author nameAuthor names are only available to PAS members.]

And another.

[Author nameAuthor names are only available to PAS members.]

Number3

[Author nameAuthor names are only available to PAS members.]

Number4

[Author nameAuthor names are only available to PAS members.]

number5

[Author nameAuthor names are only available to PAS members.]

Number6

[Author nameAuthor names are only available to PAS members.]

And one more for luck!!

---

Jak.

[Author nameAuthor names are only available to PAS members.]

Jak, thanks for reposting some of my visor pics.

I did a quick search at home and couldn’t find them right away.

Jim, I will measure my visors and get you an exact size.

I will also take more pictures of the mounting brackets and get some dimensions for you.

[Author nameAuthor names are only available to PAS members.]

Thanks for the pics. The last one os very helpful as this is what i still have to make. The correct dimensions of the visor itself would be helpful. Thanks to all who responded.

[Author]

Posts