robe rail

Home Page › Forums › Body › robe rail

Viewing 20 posts - 1 through 20 (of 48 total)
1 2 3
  • Author
    Posts
  • December 15, 2016 at 12:07 pm #391913
    Author nameAuthor names are only available to PAS members.

    Hi Guys, would anyone have a photo and measurements of the robe rail in a 1928 seven passenger Sedan.in back of the drivers seat or if there was one…thanks Ed

    December 15, 2016 at 8:38 pm #403595
    Author nameAuthor names are only available to PAS members.

    Ed,

    The picture was taken while riding in the back of Diane Gallets 1928 Series 36 EDL during the Buffalo meet. I do not know if it is original or not. Sorry, no measurements. My Series 36 is a 7 p Touring and does not have a robe rail. Hope this helps. Dave

    December 16, 2016 at 12:50 am #403597
    Author nameAuthor names are only available to PAS members.

    Hi Ed,

    Attached are some pictures of the robe rail that is our families collection 1925 Series 33 EDL. I know that this is a couple years older than your car/series. Hopefully this will help in getting a rail for your car.

    *Note: The division window opening above the robe rail is 44 1/4″. The with of the car is 50 1/2″” at the door jams and the floor is 48 1/2″” from side to side.

    Ben”

    December 16, 2016 at 12:51 am #403598
    Author nameAuthor names are only available to PAS members.

    Bracket Attachment with tape measure.

    December 16, 2016 at 12:52 am #403599
    Author nameAuthor names are only available to PAS members.

    Bracket Attachment Driver Side

    December 16, 2016 at 12:52 am #403600
    Author nameAuthor names are only available to PAS members.

    Bracket Attachment Passenger Side

    December 16, 2016 at 12:53 am #403601
    Author nameAuthor names are only available to PAS members.

    Bracket Attachment With Measurement

    December 16, 2016 at 12:54 am #403602
    Author nameAuthor names are only available to PAS members.

    Rail Attachment With Measurement

    December 16, 2016 at 9:22 am #403604
    Author nameAuthor names are only available to PAS members.

    Ben and David thank you for your help. i wonder if the open 7 pass. might be different then the EDL model at least now i know what to look for…..Ed

    December 16, 2016 at 10:37 am #403605
    Author nameAuthor names are only available to PAS members.

    Ed,

    If someone has a parts book, you could look up the numbers and see if they are the same or different.

    Bill

    December 16, 2016 at 11:36 am #403606
    Author nameAuthor names are only available to PAS members.

    The Series 33 touring car robe rail is different.

    December 16, 2016 at 11:37 am #403607
    Author nameAuthor names are only available to PAS members.

    Since Bill mentioned the parts book, I looked it up and it appears that all of the different body styles have different part numbers. If the photo isn’t clear enough for you to read, let me know and I’ll e-mail it to you.

    December 16, 2016 at 11:51 am #403608
    Author nameAuthor names are only available to PAS members.

    I checked some photos I took of the 1928 Series 36 7p Touring at the Gilmore Museum and one shows the robe rail. Definitely different from the one in the EDLs. So now I guess I have to keep my eyes open for an appropriate robe rail for my car. Looking in the Series 36 Data Book, the overhead view line drawings of the 7p sedan show a shape similar to the EDL and don’t show one in the side view. At any rate, the closed cars and open seem to be different.

    Dave

    December 16, 2016 at 2:07 pm #403611
    Author nameAuthor names are only available to PAS members.

    I would speculate that the Robe Rails on the open cars needed to be weatherproof!

    December 16, 2016 at 3:48 pm #403613
    Author nameAuthor names are only available to PAS members.

    I agree, Peter! I’ve driven our ’31 phaeton in a toad-strangling rain in Texas, and found out that the only difference with/without side curtains, with them installed you only need ONE towel per person to try to stay dry!

    December 16, 2016 at 5:34 pm #403618
    Author nameAuthor names are only available to PAS members.

    Hey David, thanks for that info it looks like 7 pass sedan has its own robe rail. that should make it a little harder to find. i hope i can get a photo of what it looks like from one of our members. i would think it would be close to the EDL’s….Ed

    December 16, 2016 at 6:02 pm #413071
    Author nameAuthor names are only available to PAS members.

    Hi Ed,

    As I was running some errands I stopped by Billy’s Vintage and Customs in Ramona, CA. They personally have a original 1927 Series 36 7-Passenger sedan. Attached are the photos you need.

    Measurements are as follows:

    Robe Rail Unit (outside edge to outside edge) 39 7/8″

    Robe Rail with Brackets (outside edge to outside edge) 40 1/4″

    Notice the detail in the curve of the rail. This matches the door handles on the outside of the car.

    For more in formation, contact Billy Sandvik. Number is in the PAS Roster.

    December 16, 2016 at 6:03 pm #403629
    Author nameAuthor names are only available to PAS members.

    Here is another picture.

    December 16, 2016 at 6:15 pm #403630
    Author nameAuthor names are only available to PAS members.

    Benjamin, thank you for help now i have to find one……i just want to say that you guys in this club are the greatest…Ed

    December 17, 2016 at 9:56 am #403640
    Author nameAuthor names are only available to PAS members.

    Hi Ed, That curved piece looks familiar, I’m going to go look though my stuff, I might have the curved hinged parts. I’ll let you know what I find.

    Greg

  • Author
    Posts
Viewing 20 posts - 1 through 20 (of 48 total)
1 2 3
  • You must be logged in to reply to this topic.