[Author nameAuthor names are only available to PAS members.]

David,

thanks yes I know it is outlawed I was just wondering about automotive paint from that era. It is a deep dark green

[Author nameAuthor names are only available to PAS members.]

Thanks all. Yes the previous owner did install an electric fuel pump. Car ran fine when we 1st got it then this problem just started.

[Author nameAuthor names are only available to PAS members.]

I can read UU-2 on the top but the paint has everything else covered. Gas pours out as if the float is stuck or bad or the needle seat is bad or blocked by debris.

[Author nameAuthor names are only available to PAS members.]

we need an edit button

[Author nameAuthor names are only available to PAS members.]

Peter,

it appears as though the gasket needs to be about 1/2″ thick correct?”

[Author nameAuthor names are only available to PAS members.]

Greg,

yes it has a long set screw.

Thanks

[Author nameAuthor names are only available to PAS members.]

Thanks all. We just want to make it right. Most parts are nickel but the bumpers are chromed. The 26 roadster we have is all nickel.

Dave, yes I did thank you! People do the craziest things when it comes to the electrical systems. Just fix it right.

[Author nameAuthor names are only available to PAS members.]

Randy,

thanks I tried that and found nothing. Was hoping someone on the board might have one or some info.

[Author nameAuthor names are only available to PAS members.]

added oictures

[Author nameAuthor names are only available to PAS members.]

Thanks William and David

[Author nameAuthor names are only available to PAS members.]

This has me so baffled. where would I hook the left side wires to? As I said the previous owner has the left hooked to a toggle switch.

[Author nameAuthor names are only available to PAS members.]

yes, I did. email is [email protected]

[Author nameAuthor names are only available to PAS members.]

Thanks Dave,

I have tried that the cover loads then stops.

[Author nameAuthor names are only available to PAS members.]

This doesn’t make sense to me. The left switch has no terminal the center has 2 and the right only 1. They previous owner has the left hooked to a toggle switch.

[Author]

Posts