[Author nameAuthor names are only available to PAS members.]

George,

I will go ahead and soak it. We have tried to loosen it but it did not budge. I don’t know if it has been modified. Peter’s looks different than mine.

Ken

[Author nameAuthor names are only available to PAS members.]

Here is another picture out of the water pump.

[Author nameAuthor names are only available to PAS members.]

Thank you everyone for your help. Peter here is a picture of my cup it looks like a regular grease fitting. It looks like it should come apart. When we tried to loosen the cap the whole unit came out of the water pump.

I appreciate everybody helping.

Ken

[Author nameAuthor names are only available to PAS members.]

George thank you for getting back to me. We took the Grease Cup off the Water Pump and there is a small hole through the center of the threads. Is that where I need to pack the grease into? For some reason I was thinking the Grease should be packed into the top. The cup itself looks like it should separate but we were unable to figure out how to back it off.

I appreciate you impute,

Ken

[Author nameAuthor names are only available to PAS members.]

I have the Lubricant and was able to get it from a Petroleum Dealer, JB Dewar.

They were nice enough to just give me some. They stated that they get in 9 pound quantities.

I do have a question about how do I go about filling the cup. I have books and the owners manual but none of them address that topic. I guess the figure a guy should know how to fill the cup. When I put the grease inside the packing it came out of the back of the gland nut. I tried to loosen the Grease Cup and it just came out completely.

Thank you for the help,

Ken

[Author nameAuthor names are only available to PAS members.]

George,

I have a call into our local Farm Supply here is San Luis Obispo. Thank you for the tip on Calcium Grease. When he calls me back I will ask him about that.

Ken

[Author nameAuthor names are only available to PAS members.]

Ed and Tony,

Thank you very much. I will order water pump grease.

Ken

[Author nameAuthor names are only available to PAS members.]

George,

Is it okay to use wheel bearing grease for a boat trailer in the water pump cup? What do you recommend?

Thank you.

Ken

[Author nameAuthor names are only available to PAS members.]

Great looking Pierce Arrow, Congratulations, Thank you for sharing your win.

[Author nameAuthor names are only available to PAS members.]

Here is a picture of my dash it is the color of the body. It has the

wood trim of the Deluxe in the Photos.

Ken

[Author nameAuthor names are only available to PAS members.]

Hello Randy,

I am trying to post the picture of my dash and am having problems. I haven’t been able to post pictures for a week. My wood surround is shiny it has been restored so I am not sure if mine is correct either.

I will take another picture tomorrow and see if that will post.

Ken

[Author nameAuthor names are only available to PAS members.]

Thank you for the education once again.

Does the Dash look different on either one?

I know mine is a Deluxe but I had no idea that there

was difference when I bought until Peter told me when I joined the

club.

Thanks,

Ken

[Author nameAuthor names are only available to PAS members.]

Peter,

Thank you for the information. You have a wealth of information. Please keep

sharing.

Ken

[Author nameAuthor names are only available to PAS members.]

Hello Peter and Randy,

I do have a pair of Driving shoes. I will give that at try. Randy I was thinking the same thing this morning about my modern car and playing with the seat.

Thank you for helping me with my seating space. I need to also get rid of my Gut.

Ken

[Author nameAuthor names are only available to PAS members.]

Peter,

That is a lot of great information. I am wondering what the measurement is

from the floor to the top of your cushion with out the 1X2’s? How far are the

pedals from your seat?

I know I am still going to have to loose weight to get my legs in. I am

motivated.

Thanks,

Ken

[Author nameAuthor names are only available to PAS members.]

That is a first for me. I had no idea there was such a thing out there.

[Author nameAuthor names are only available to PAS members.]

Greg,

Thank you for the useful information. I will copy it and put it in a file where

I can access it when needed. I have a spare engine and will go out and take a look at the access hole and brass plate to see what you are referring to.

Ken

[Author nameAuthor names are only available to PAS members.]

Peter,

I will be waiting with open ears to hear what effect it has on leg room.

I hope it works. That would be an easy fix.

Ken

[Author nameAuthor names are only available to PAS members.]

Thank you everyone for the information. I am hoping to that by taking some

of the padding out it will help me fit into the car. Does anyone have a picture

of a Sedan Deluxe with the Upholstery off so I can see what it looks like?

Thanks,

Ken

[Author nameAuthor names are only available to PAS members.]

Tom,

Beautiful looking Pierce Arrow. Hope to see it in California sometime.

Ken

[Author]

Posts