Forum Replies Created

Viewing 20 posts - 261 through 280 (of 299 total)
  • Author
    Posts
  • in reply to: Tail lights assembly reversed #401821

    Greg,

    Thank you for the Pictures. I had no idea that they were to have an

    “S”” until this message board started.

    Ken”

    in reply to: Tail lights assembly reversed #412912

    George and Peter,

    Thank you for the information. I had to take the Brake Lens off because the

    contact on the bulb was not hitting and did not see the “S”. We had to add

    some solder to the bulb to make the contact work. I will take a

    closer look to see if there is one now that you have told me about it.

    You guys are the best.

    Sincerely,

    Ken

    in reply to: Tail lights assembly reversed #401813

    Peter,

    Then mine is in the correct order. I don’t have an S on mine.

    Thank you Paul and Peter.

    Ken

    in reply to: Tail lights assembly reversed #401804

    I would also like to know which order they came in. Mine is the reverse of yours with the Backup Light on the left and the Brake Light on the right.

    Thank you,

    Ken

    in reply to: Engine back in #401733

    David,

    Thank you for sharing your experience so we don’t have the same mistake.

    I remember when pulling Small Block Chevy’s or whatever we never tightened the

    bolt all the way down. I am glad you mentioned it so we don’t have your personal

    experience.

    Ken

    in reply to: 1931 Pierce Arrow Model 42 convertible coupe #401715

    Robert,

    Welcome the group they have been very helpful to me.

    Thank you Brooks for the information. Peter Williams was able to give me

    some history of ownership on my car. He emailed it to me.

    Sincerely,

    Ken

    in reply to: Removing the Front Seat Backrest for Upholstering? #401714

    Peter,

    Great information. I need all the room I can get.

    Thank you,

    Ken

    in reply to: Removing the Front Seat Backrest for Upholstering? #401702

    Thank you Peter and David for the feedback.

    Peter, I look forward to seeing the pictures. I was also thinking of removing

    the stuffing. Now that Dave has mentioned the Springs I think that would help give

    me even more room. I just hate to fool around with the upholstery sense it all looks new.

    Ken

    in reply to: Removing the Front Seat Backrest for Upholstering? #401698

    Thank you Greg for the information. I was still trying to figure out if there is any

    possibility of me moving my seat to the rear so I can have some leg room. It sounds like I am out of luck. I hate to think I have to have a driver so I can enjoy my 80 Sedan.

    My wife volunteered to learn how to drive it tonight but I hate to put that kind of pressure on her.

    I also would enjoy seeing pictures Peter so I can understand how my seat is put together.

    Thank you,

    Ken

    in reply to: Car hauler #401585

    David,

    Some of us will do anything to put a vehicle in our trailers. Now that was thinking.

    It still looks like a tight fit.

    I have thought about changing the wheels on my Pierce Arrow for transport then

    putting them back on after I arrive.

    Ken

    in reply to: Optima Red Top 6V Batteries #401552

    Thank you Peter for allowing us to get this great deal on the Optima Red Top.

    I will be getting ours when we get back from our vacation.

    Ken

    in reply to: parts needed & information on leaky water pump #401541

    Hello, I just found the following Series 80 water pump on eBay. It looks a little ruff but I am not an expert. Sure glad I bought my car in as nice a shape as it is in.

    Below is the link.

    http://www.ebay.com/itm/REBUILT-MID-1920S-PIERCE-ARROW-SERIES-89-WATERPUMP-/381559087050?hash=item58d6b19fca:g:6V8AAOSwoBtW1iMt&vxp=mtr

    in reply to: Republican Radiator Mascot #401534

    I am predicting a Sweep by the Donald.

    in reply to: 1927 #401531

    Peter,

    It was way more than what I wanted to pay just wanted to let Ed know

    where one is at.

    Ken

    in reply to: parts needed & information on leaky water pump #401530

    Karl,

    Thank you for the update. I will see how the fix that has been recommended works out and keep watching the blog.

    Ken

    in reply to: Republican Radiator Mascot #401529

    Peter,

    Absolutely! I can see it now.

    Ken

    in reply to: 1927 #401526
    in reply to: Republican Radiator Mascot #401525

    Peter,

    That sure is a good looking Elephant.

    Ken

    in reply to: parts needed & information on leaky water pump #401524

    Greg,

    Thank you for the updated information. George is sending me some packing for mine and hopefully that will take care of my leaking.

    Ken

    in reply to: 1927 #400250

    Hello Everyone, I would like to piggyback off of Ed’s wish list. I also would like to have a Wheel Hub Wrench and a Radiator Cap for my 1925 80 Series 5 passenger deluxe.

    Thank you for all of the support that you guys offer. It is much appreciated.

    Sincerely,

    Ken Arritt

Viewing 20 posts - 261 through 280 (of 299 total)